The AMP203 is a revolutionary small amplifier, featuring network input through Dante providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency, while allowing all other data to be connected on the same network.
It features various DSP functionalities, including Low-pass, Band-pass and High-pass filters. All configurations can be made via RS485 and Ethernet.
The output connector has been implemented using a 4-pin terminal block connector, featuring an output power of 30W per channel and 60W when bridged.
Using PoE (Power over Ethernet) the amplifier receives both power and signal through a single networking cable, this way flexibility is maximized while needed cabling is kept at a minimum.
The compact convection cooled enclosure eliminates any humm or buzz otherwise caused by a fan. Various optional mounting brackets are available making it ideal for mounting under a desk, in a closet or on the wall, 19” rack mounting hardware is available as well.
| SYSTEM SPECIFICATIONS | ||||
|---|---|---|---|---|
| THD+N (@ 1 kHz) | < 0.2% | |||
| Cooling | Passive | |||
| Control | RS-485 | |||
| TCP/IP | ||||
| Power | PoE 802.3bt | |||
| Outputs | Type | 1 x Stereo Loudspeaker | ||
| Inputs | Other | Connector | RJ45 | |
| Type | 1 x RS-485 + Differential audio | |||
| 1 x Ethernet | ||||
| RMS Power | @ 4 Ω Stereo | 2 x 30 W | ||
| @ 8 Ω Stereo | 2 x 30 W | |||
| @ 4 Ω Bridge | 1 x 60 W | |||
| PRODUCT FEATURES | ||||
|---|---|---|---|---|
| Dimensions | 108 x 44 x 165 mm (W x H x D) | |||
ACCESSORIES & RELATED PRODUCTS